Links

A good page on this piece of server by Andew McNabb:
http://www.mcnabbs.org/andrew/linux/proliant/

To read out the status of the RAID array on this machine:
http://www.strocamp.net/opensource/cpqarrayd.php

My configuration

Single P3 1000 MHz, 133 MHz FSB, 4 x 128 Mb memory, SCSI RAID-1 config, "NC313C". The RAID array is identified by lspci as a "RAID bus controller: LSI Logic / Symbios Logic 53C1510 (rev 02)" but the driver for this card cpqarray call it an "Compaq Integrated Array Controller".

Notes

Once I received the following errors when installing an RPM:

 hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
 hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
 ide: failed opcode was: unknown
 ... repeated about 10 times ...
 end_request; I/O error, dev fd0, sector 0
 hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
 hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
 ide: failed opcode was: unknown

Don't be alarmed by this; it's not the harddisk but the CD-ROM drive. The ProLiant DL360 doesn't support IDE drives.

Sensors

Compaq sensors-detect readout
lsmod output
1022a on compaq dl360 motherboard